Continuity Inspection; Circuit Open/Short Inspection - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
• Before performing the following inspection, make sure to follow the procedure as indicated in
the troubleshooting flowchart. (See

Continuity Inspection

1. Inspect the following items:
• Power steering fluid amount (See
• Power steering-related inspection (See
2. Disconnect the PSP switch connector.
3. Start the engine.
4. Verify that the continuity between PSP switch terminal A and body GND is as indicated in the table.
• If not as indicated in the table, replace the CPP switch. (See
(Z6) DISASSEMBLY/ASSEMBLY.)
• If the monitor item condition/specification (reference) is not within the specification, even though
there is no malfunction, perform the "Circuit Open/Short Inspection".

Circuit Open/Short Inspection

1. Remove the PCM connector cover.
2. Disconnect the PCM connector. (See
3. Inspect the following wiring harness for open or short circuit (continuity check).
Downloaded from
Troubleshooting
POWER STEERING FLUID
STEERING LOCATION
INTAKE-AIR SYSTEM REMOVAL/INSTALLATION
https://carmanualshub.com/
Procedure.)
INSPECTION.)
INDEX.)
POWER STEERING OIL PUMP
- automotive repair manuals website
[Z6].)