Camshaft Cap Installation Note; Front Oil Seal Replacement [Z6] - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
1. Tightening torque: 17.5-22.5 N·m {1.79-2.29 kgf·m, 13.0-16.5 ft·lbf}
2. Tightening angle: 85°-95°
3. Tightening angle: 85°-95°

Camshaft Cap Installation Note

1. Align the No.1 cylinder camshaft position to the TDC position, and install the camshaft.
2. Install the camshaft caps in the positions numbered as shown in the figure, and then temporarily
tighten the No.2 and No.7 camshaft cap installation bolts.
3. Tighten the camshaft cap installation bolts in 2-3 passes uniformly in the order shown in the figure.
Tightening torque
11.3-14.2 N·m {116-144 kgf·cm, 101-125 in·lbf}

FRONT OIL SEAL REPLACEMENT [Z6]

Downloaded from https://carmanualshub.com/ - automotive repair manuals website
B3E011010602W01