Front Oil Seal Installation Note - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
• Install the engine front cover within 10 min of applying the silicone sealant.
Thickness
A: 2.2-3.2 mm {0.087-0.125 in}
B: 1.5-2.5 mm {0.059-0.098 in}
2. Install the engine front cover bolts in the order shown in the figure.
Bolt No. Tightening torque
8.0-11.5 N·m
1-18
{81.6-117.2 kgf·cm, 70.9-101.7 in·lbf}
19-22
40-55 N·m {4.1-5.6 kgf·m, 29.7-40.5 ft·lbf}

Front Oil Seal Installation Note

1. Apply clean engine oil to the oil seal.
2. Push the oil seal slightly in by hand.
3. Compress the oil seal using the SST and a hammer.
Downloaded from https://carmanualshub.com/ - automotive repair manuals website