Type D Installation - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
completely engaged with the fuel pipe.
1. Inspect the fuel hose and fuel pipe sealing surface for damage and deformation.
• If there is any malfunction, replace it with a new one.
2. When disconnecting and reconnecting the quick release connector, verify if the metal reinforcement
pipe protrudes from the resin pipe end while pressing the end with a finger.
• If the metal pipe protrudes from the resin pipe, insert it flush with the end of the resin pipe.
3. Reconnect the fuel hose straight to the fuel pipe until a click is heard.
4. Lightly pull and push the quick release connector a few times by hand, and then verify that it is
connected securely.
5. Inspect all related parts by performing "AFTER SERVICE PRECAUTION". (See
PRECAUTION.)

Type D Installation

Note
• If the quick release connector O-ring is damaged or has slipped, replace the fuel hose.
• A checker tab is integrated with the quick release connector for new fuel hoses and evaporative
hoses. Remove the checker tab from the quick release connector after the connector is
completely engaged with the fuel pipe.
1. Inspect the fuel hose and fuel pipe sealing surface for damage and deformation.
• If there is any malfunction, replace it with a new one.
Downloaded from https://carmanualshub.com/
AFTER SERVICE
- automotive repair manuals website