Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Pressure control solenoid (-) signal
PCM terminals
• 1AV (+)-Negative battery terminal (-)
Oscilloscope setting
• 200 mV/DIV (Y), 1 ms/DIV (X), DC range
Vehicle condition
• All of the following conditions are met.
- Ignition switch is turned to the ON position. (engine off)
- P or N position
- CTP
Vehicle speed signal (ATX)
PCM terminals
• 1AY (+)-Negative battery terminal (-)
Oscilloscope setting
• 1 V/DIV (Y), 2.5 ms/DIV (X), DC range
Vehicle condition
• Vehicle speed is 32 km/h {20 mph}.
Downloaded from
https://carmanualshub.com/
- automotive repair manuals website