Oil Filter Replacement [Z6] - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
3. Remove the oil pan drain plug.
4. Drain the engine oil into a container.
5. Install the oil pan drain plug with a new washer.
Oil pan drain plug tightening torque
30-41 N·m {3.1-4.1 kgf·m, 23-30 ft·lbf}
Note
• The amount of residual oil in the engine can vary according to factors such as the replacement
method, oil temperature. Verify the oil level after engine oil replacement.
6. Refill the engine with the type and amount of engine oil specified in the table.
Recommended engine oil
Item
Grade API SL, ACEA A3
Viscosity
5W-30
(SAE)
Mazda genuine
Remarks
Dexelia oil e.g.
Oil capacity (approx. quantity)
L {US qt, Imp qt}
Item
Oil replacement
Oil and oil filter replacement 4.3 {4.5, 3.8}
Total (dry engine)
7. Install the oil filler cap.
8. Start the engine and confirm that there is no oil leakage.
• If there is oil leakage, find the cause and repair or replace the applicable part.
9. Inspect the oil level. (See

OIL FILTER REPLACEMENT [Z6]

Downloaded from
Europe
API SG, SH, SJ, SL, ILSAC GF-2, GF-3
5W- 40, 30, 20, 20W-20, 10W-30, 10W-40, 10W-50, 20W-40,
10W-40
20 15W-40, 20W-50, 15W-50, 5W-20, 5W-30
- -
Specifications
3.9 {4.1, 3.4}
4.6 {4.9, 4.0}
ENGINE OIL LEVEL INSPECTION
https://carmanualshub.com/
Specifications
Except Europe
[LF].)
- automotive repair manuals website
B3E011114300W01