Oil Control Valve (Ocv) Inspection [Z6]; Coil Resistance Inspection - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
18. Tighten the No.3 engine mount installation stud bolts.
Tightening torque
7-13 N·m {0.8-1.3 kgf·m, 5.2-9.5 ft·lbf}
19. Install the No.3 engine mount, and then temporarily tighten the installation bolts and nuts.
20. Tighten the installation bolts and nuts in the order shown in the figure.
Tightening torque
1 (nuts) : 44-61 N·m {4.5-6.2 kgf·m, 33-44 ft·lbf}
2 (bolts) : 74.5-104.9 N·m {7.60-10.70 kgf·m, 55.0-77.3 ft·lbf}
21. Install the ground. (No.3 engine mount)
22. Install the P/S reserve tank and coolant reserve tank with the hose still connected.
23. Install the accelerator cable and bracket.
24. Install the air cleaner component. (See
25. Connect the negative battery cable.
26. Install the battery cover.

OIL CONTROL VALVE (OCV) INSPECTION [Z6]

Coil resistance inspection

1. Remove the battery cover.
Downloaded from
INTAKE-AIR SYSTEM REMOVAL/INSTALLATION
https://carmanualshub.com/ - automotive repair manuals website
[Z6].)
B3E011014420W02