Obd Pending Trouble Code [Z6] - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes

OBD PENDING TROUBLE CODE [Z6]

B3E010200102W14
• These appear when a problem is detected in a monitored system. The code for a failed system is stored
in the PCM memory in the first drive cycle. This code is called the pending code. If the problem is not
found in a second drive cycle, the PCM judges that the system returned to normal or the problem was
mistakenly detected, and deletes the pending code (1DC). If the problem is not found in a second drive
cycle, the PCM judges that the system returned to normal or the problem was mistakenly detected, and
deletes the pending code when the ignition switch is turned to the ON position in the next drive cycle
(2DC). If the problem is found in a second drive cycle too, the PCM judges that the system has failed, and
the DTC is stored.
Downloaded from https://carmanualshub.com/ - automotive repair manuals website