HPE ProLiant ML110 Gen10 User Manual page 64

b. Install a second hot-plug power supply in the power supply bay 2.
15. Connect each power cord to the server.
16. Secure the power cord in the strain relief strap attached to the power supply handle:
a. Unwrap the strain relief strap from the power supply handle.
CAUTION: Avoid tight bend radii to prevent damaging the internal wires of a power cord or a server cable.
Never bend power cords and server cables tight enough to cause a crease in the sheathing.
b. Secure the power cord with the strain relief strap. Roll the extra length of the strap around the power supply
handle.
17. Install the system air baffle.
18. Install the PCI air baffle.
19. Install the access panel.
20. Do one of the following:
Hardware options installation
64