Make sure that the controller board is firmly seated in the slot.
11. Close the PCI slot retainer.
12. Cable the controller.
13. To enable HPE Smart Array SR SmartCache in a Smart Array P-class type-p Gen10 controller, connect the storage
controller backup power cable.
SmartCache and CacheCade enable solid-state drives to be used as caching devices for hard drive media. These
features accelerate access to frequently used data by caching hot data from the hard drives onto the solid-state
drives.
14. Install the system air baffle.
15. Install the PCI air baffle.
16. Install the access panel.
17. Do one of the following:
Hardware options installation
76