Front Panel Leds And Buttons - HPE ProLiant ML110 Gen10 User Manual

Front panel LEDs and buttons

Item Description
1 Power On/Standby button and
system power LED
2 Health LED
3 NIC status LED
1
When all three LEDs described in this table simultaneously, a power fault has occurred. For more information, see Front panel LED
power fault codes.
2
Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the front
I/O cable is disconnected.
3
If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.
Status
Solid green
1
Flashing green
Solid amber
Off
1
Solid green
Flashing green
Flashing amber
Flashing red
1
Solid green
Flashing green
Off
Definition
Normal
Performing power-on sequence
System in standby
2
No power present
Normal
iLO is rebooting.
3
System degraded
3
System critical
Linked to network
Network active
No network activity
Component identification
8