NOTICE
●
The maximum weight that can be loaded
on the luggage compartment variable floor in
the top position is 100 kg.
●
Do not let the luggage compartment floor
fall when closing it. Always carefully guide
it downwards in a controlled manner. Other-
wise, the lining and the floor of the luggage
compartment could be damaged.
Net partition
Partition net behind the rear seat
Valid for: Leon Sportstourer
Fig. 181
In the boot: securing the partition
net.
Storing objects
Net partition
Fig. 182
In the boot: removing the
partition net.
Pulling out and securing the net partition
›››
●
Pull up handle
Fig. 181
2
net from the casing
.
4
●
Hook in the net partition on the right or left
side
(magnified image).
3
●
Hook in the net partition into the housing on
the other side
by pulling the rod.
1
The net partition is properly assembled when
the T-shaped ends are firmly secured in the
corresponding housings
and
3
Retracting the net partition
●
Unhook the rod from the housings
.
1
●
Roll up the net into the casing
with your hand.
Removing the net partition
●
Fold the rear seat backrests forward.
●
Press the left or right release catch
›››
Fig. 182
in the direction of the arrow
●
Remove the casing from the support in the
direction of the arrow
Fitting the net partition
●
Fold the rear seat backrests forward.
●
Fit the casing in the right and left supports.
●
Press the casing into the left and right sup-
ports in the opposite direction to the arrow
›››
Fig. 182
2
ings on the release buttons should no longer
to remove the
be visible.
WARNING
●
Always secure objects, even when the net
partition is properly assembled.
●
There should be nobody behind the as-
sembled partition when the vehicle is mov-
ing.
.
1
●
The attachments on the backs of the rear
seats must never be used to fit the net par-
tition when the rear seat backs are in their
vertical position.
and
3
lowering it
4
.
1
›››
Fig. 182
.
2
until it engages. The red mark-
279