Seat CUPRA LEON 2022 Owner's Manual page 138

Table of Contents

Advertisement

as manual changes are made to the fan
speed, air distribution, windscreen demist-
ing or air recirculation.
Fan speed in
mode can be set in the
Climaprofile (low, medium or high) by suc-
cessively pressing the function button
Climaprofile adjustment is also possible in
the Settings submenu.
Rear Submenu
Submenu for the air conditioning in the rear of
the passenger compartment where the follow-
ing functions are found:
Connect/disconnect the Climatronic A.
With the icon lit up, it is not possible to
adjust the temperature from the rear area.
/
Press to adjust the rear zone tempera-
ture.
iClimate submenu
Submenu where different smart and/or auto-
matic functionalities are located, depending
on the version.
Warm hands: automatically adjusts for a
certain time the air conditioning to heat
the steering wheel area.
Cool feet: automatically adjusts for a cer-
tain time the air conditioning to cool the
footwell area.
136
Air conditioning
Defog the windows: automatically ad-
justs for a certain time the air condition-
ing to defog the windscreen.
Warm feet: automatically adjusts for a
certain time the air conditioning to heat
.
the footwell area.
Fresh Air: automatically adjusts for a cer-
tain time the air conditioning to ventilate
the passenger compartment.
Fast cooling: automatically adjusts the air
conditioning to ventilate the vehicle in-
terior for a certain amount of time.
AirCare Climate submenu
The air conditioning system contains a filter
that can reduce the penetration of allergenic
contaminants.
When the Air Care function is activated, the
recirculation mode is on and the air is regula-
ted automatically and continuously, as long as
there is no detection of fogging hazard.
Press
to switch the AirCare function on/
off.
Press
to access information about the Air-
Care system function.
Settings submenu
Submenu where the following settings are lo-
cated:
Automatic recirculation: to switch automatic
››› 
air recirculation on and off
page 136.
Climaprofile: To adjust the fan speed (low,
medium or high) during operation in
Smart heated seat: Pressing
smart heated seats function on/off for the
››› 
driver and front passenger
page 137.
Rear controls
Fig. 110 
In the centre console, rear
section: controls for the rear seats.
Temperature selection
››› 
Press buttons
and
Fig. 110
1
2
just the temperature of the rear zone.
Air recirculation
Air recirculation mode prevents the ambient
air from entering the interior.
mode.
turns the
to ad-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cupra sportstourer 2022

Table of Contents