Table of Contents
Advertisement
Fig. 130
On the multifunction steering
wheel: buttons for operating the ACC.
›››
Fig. 129
Vehicle ahead detected. It will light up if
1
the distance to the vehicle is adjusted.
Selected distance level 2.
2
This information can be displayed on the cen-
tral panel of the Assistants view, or in the left
›››
hand information profile
page 16. If these
views are not selected, it will be automatically
displayed in the lower central part of the in-
strument cluster in a simplified manner.
The set speed will be displayed next to the
function status indicator.
Connecting
●
Press the
button on the multifunction
›››
steering wheel
Fig. 130.
The ACC does not regulate anything yet
(standby).
ACC - Adaptive Cruise Control
Assistant systems
Start regulation
Activating the ACC system also automatically
activates the ESC and traction control (TCS).
●
To start regulation, press the button
›››
Fig. 130.
The ACC saves the current speed and main-
tains the set distance. If the current speed is
outside the preset speed range, ACC sets the
minimum speed (if driving slowly) or maximum
speed (if driving fast).
Depending on the driving situation, the follow-
ing indicator lamps come on:
Lights up green
ACC connected, no vehicle detected in
front.
Lights up green
ACC connected, vehicle detected in
front.
When the ACC is in standby, the indicator
lamps light up grey.
Setting speed
To program the speed, press the or
›››
Fig. 130
buttons to the desired speed. The
speed is adjusted at intervals of 10 km/h (5
mph).
While the ACC is active, you can press the
button to increase the desired speed by 1 km/h
(1 mph). You can then press
to decrease it
by 1 km/h (1 mph).
Setting your distance level
The distance can be set to one of five levels,
from very short to very long:
●
Press the button
and then the button or
›››
Fig. 130.
●
Alternatively, press the button
times as necessary to set the desired distance.
Keep in mind each country's regulations on
minimum braking distances.
Suspend regulation (standby)
›››
●
Briefly press the button
press the brake pedal.
The ACC indicator lamp is grey; the speed and
distance are saved.
If the ESC or TCS is switched off, the ACC is
automatically interrupted.
Reinstating the cruise control
●
Press the
button. The ACC regulates to
the last speed and distance setting.
●
OR: Press the button
to regulate to the
current speed.
Switching off
●
Press and hold the button
. The set speed
is cleared.
as many
Fig. 130
or
183
Advertisement
Table of Contents
