Table of Contents
Advertisement
●
Check if one of the causes indicated above
has occurred.
●
Once the source of the problem has been
eliminated, the system may be reconnected.
●
If the problem persists, consult a specialised
workshop.
Parking aid Plus
Description
Fig. 147
Parking aid view on the
Infotainment system display.
Parking aid plus assists the driver by giving
visual and audio warnings about obstacles de-
tected in front of and behind the vehicle.
The bumpers are fitted with sensors. When
an obstacle is detected, it is indicated by au-
dible signals and in the Infotainment system
›››
Fig. 147.
210
Parking and manoeuvring
When moving close to an obstacle, it is possi-
ble to know if the obstacle is in front of the
vehicle or behind it according to the sound
frequency.
The approximate measurement range of the
sensors is:
1.20 m
A
0.90 m
B
1.60 m
C
0.90 m
D
As you approach the obstacle, the frequency
of the audible signals will increase. The signal
will sound continuously at around 0.30 m: Stop
the vehicle!
If the separation is maintained, the warning
volume is reduced after about 2.5 seconds.
Error messages
If a an error or fault message is displayed on
the instrument cluster in Park Assist, there is a
fault.
If the fault doesn't disappear before discon-
necting the ignition, it will not be indicated
next time the parking aid is connected.
If a rear sensor is faulty, only the obstacles in
the front area are detected. If a front sensor is
faulty, only the obstacles in the rear area are
displayed. The symbol
is displayed.
We recommend taking the vehicle to a special-
ised workshop to have the fault repaired.
Trailer mode
On vehicles with a factory-mounted trailer
hook, when the trailer is connected, the rear
sensors will not activate when reverse gear is
engaged or button
is pressed in the Infotain-
ment system (
> Assistants). Therefore, any
objects behind or to the side of the vehicle will
not be indicated on the screen and no audio
signals will sound.
The screen will only display objects detected
at the front, and the vehicle's trajectory will be
hidden.
Parking assist settings
The indications and acoustic signals are set in
the Infotainment system: function button
Assistants > Parking > Parking as-
sist.
●
Automatic activation: On/off
●
Front volume: Volume in the front and
rear area.
●
Rear volume: Volume in the rear area.
●
Reduce volume: When the parking aid is
switched on, the volume of the audio source
will be reduced, depending on the selected
option.
>
Advertisement
Table of Contents
