Table of Contents
Advertisement
exhaust system. The configuration is preset for
each profile and can be modified in the Indi-
vidual profile.
Adaptive chassis control (DCC)
The DCC continuously adapts the damping of
the suspension system to the characteristics
of the road surface and the driving situation
(speed, acceleration and steering wheel angle)
according to the selected driving profile. The
vehicle's dynamic behaviour is also adapted to
improve grip on curves and turning capacity.
Within the Individual profile you can also ad-
just the DCC level in a customised manner. In
the event of a fault in the DCC, the following
message is displayed on the instrument cluster
display> Fault: damping adjustment.
Four-wheel drive (4Drive)
Modify the transmission to adjust the vehicle's
traction capacity to the road surface. The ac-
celeration capacity from a standstill will also be
modified.
Steering
The operation of the power steering is modi-
fied and adapted to the selected profile to of-
fer the best behaviour for each situation.
Air conditioning
Climatronic can operate in Eco mode, espe-
cially restricting fuel consumption.
Drive Profiles
Driving
Adaptive Cruise Control (ACC)
Depending on the driving profile, the perform-
ance of the ACC to allow adaptation to a
speed that is more sporty or fuel consump-
tion-friendly.
PreCrash system
The PreCrash system adapts according to the
›››
selected configuration
page 48.
The Cupra driving profile has specific settings
to adapt it to driving characteristics.
Selecting a driving profile
Fig. 117
Multifunction steering wheel:
button to change the driving profile.
The drive profile can be selected when the ig-
nition is switched on and the vehicle is station-
›››
ary or moving
.
Selecting a driving profile
●
Press the
> Drive Profile function button.
●
OR: Press the function button
settings > Drive Profile to display the available
profiles.
●
OR: Press the function button
finger horizontally across the screen to Drive
Profile. Press
to change the driving profile
or double press on the icon to show the availa-
ble profiles.
●
OR: With the Infotainment System turned
off, by pressing on the Drive Profile icon, the
available driving profiles will be displayed.
›››
●
OR: Briefly press the
Fig. 117
button to change the driving profile. Press and
hold the
button to access the Cupra profile
directly.
Displaying the drive profile information
●
To display more information on the selected
drive profile, press Information in the info-
tainment system.
WARNING
Adjusting the driving profile while driving can
distract attention from traffic and cause acci-
dents.
●
Always drive as carefully and responsibly as
possible.
> Vehicle
, slide your
(arrow)
167
Advertisement
Table of Contents
