Fig. 207
Right side of the front bumper:
towline anchorage screwed in.
The housing of the removable towline anchor-
age is on the right side of the front bumper
›››
underneath a cover
Fig. 206.
The towing eye should always be kept in the
vehicle.
Bear in mind the instructions for towing
›››
page 308.
Fitting the towline anchorage
●
Remove the towing eye from the vehicle tool
kit in the luggage compartment
●
Remove the cover by pressing down on its
base and leave it hanging from the vehicle
›››
Fig. 206.
●
Screw the towing eye in the housing by
turning it to the maximum anticlockwise
›››
›››
Fig. 207
,
. Use a suitable object
that can completely and securely tighten the
towing eye in its housing.
310
Miscellaneous situations
●
After towing, unscrew the towing eye clock-
wise with a suitable object.
●
Replace the cover and push it in until it clicks
into place.
●
Clean the towing eye if necessary and then
store it in the luggage compartment along with
the other vehicle tools.
NOTICE
The towing eye must always be completely
and firmly tightened. Otherwise, it could
jump out of the housing during towing.
›››
page 303.
Rear towline anchorage
Fig. 208
Rear bumper on right: remove
the lid.
Leon Sportstourer;
Leon.