Seat CUPRA LEON 2022 Owner's Manual page 132

Table of Contents

Advertisement

Depending on the equipment fitted on
the vehicle, the mirrors may be heated
according to the outside temperature.
Folding the mirrors
The exterior mirror cannot be adjusted
and all functions are deactivated.
Activating exterior mirror functions
The following exterior mirror functions can
be activated and deactivated in the vehicle
settings menu of the infotainment system
››› 
page 36.
Synchronized regulation of the exterior mir-
rors
The synchronised mirror setting simultane-
ously adjusts the right hand exterior mirror
when the left mirror is adjusted
Turn the control to position
Adjust the left-hand exterior mirror. The
right exterior mirror will be adjusted at the
same time (synchronised).
If necessary, correct the setting of the right
hand mirror: turn the control to position
1)
Regulation in right-hand drive vehicles is symmetrical
2)
Not available in all markets.
130
Fold the rearview mirrors when locking the
vehicle
When the vehicle is locked or unlocked from
››› 
.
the outside, the exterior mirrors can be fol-
ded in or out automatically, depending on the
equipment. For this purpose, the rotary control
has to be in position
If the rotary control of the electric exterior mir-
rors is in the folded position, the exterior mir-
rors remain folded.
Memory function
The memory buttons
used to save and turn on settings for the exte-
rior mirrors.
The settings will also be saved in the user of
the online
Saving the passenger rear view mirror set-
tings for reversing
.
1)
Switch the ignition on.
In the infotainment system, select
> Vehicle > Exterior > Mirrors
››› 
page 36.
.
1)
Select the R
Select reverse gear.
Visibility
, , , or .
››› 
page 115
can be
services.
2)
position on the control.
1)
Adjust the front passenger exterior mirror so
that you can see, for example, the kerb area
well.
Release the reverse gear.
The adjusted position for the rear view mirror
is stored.
Activating the passenger side exterior mirror
settings for reversing
Turn the exterior mirror control knob to posi-
tion
.
1)
Engage reverse gear with the ignition
switched on. The right-hand exterior rear-view
mirror will move to the saved position.
The passenger side exterior mirror leaves the
saved reversing position when the vehicle is
travelling faster than approx. 15 km/h (9 mph),
or if the control is turned from position to
another position.
WARNING
Fold and unfold the exterior mirror, taking
care to avoid injuries.
Only fold or unfold the exterior mirror
when there is no-one in the way of the mir-
ror.
When moving the mirror, take care not to
trap fingers between the mirror and the mir-
ror bracket.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cupra sportstourer 2022

Table of Contents