Luggage compartment floor (7-
seater vehicles)
Fig. 200
In the boot: lift the boot floor.
Open boot floor
›››
Grab the boot floor by the cord
lift it in the direction of the arrow and remove it.
Close boot floor
●
Place the boot floor on the support and care-
fully lower it.
NOTICE
●
Do not let the luggage compartment floor
fall when closing it. Always carefully guide
it downward in a controlled manner. Other-
wise, the lining and the floor of the boot
could be damaged.
●
The maximum weight that can be loaded
on the luggage compartment variable floor
in the top position is 125 kg.
Storing objects
Net partition
Unfolding and folding the net parti-
tion
Fig. 201
Deploying the net partition.
Fig. 200
and
Fig. 202
Folding in the net partition.
Before fitting the net partition in the vehicle it
must be unfolded.
Net partition
Fold out the net partition
●
Take out the partition net from the corre-
sponding bag and unroll it.
›››
●
Extend the cross rods
Fig. 201
of the net in the direction of the arrows until a
"clicks" is heard.
Folding in the net partition
›››
●
Press on the release button
and bend the cross rod in the direction of the
arrow with the button pressed.
›››
●
Press on the release button
and bend the cross rod in the direction of the
arrow with the button pressed.
●
Fold in the net partition and store it in its bag.
●
Store the net partition safely in the vehicle.
and
1
2
Fig. 202
1
Fig. 202
2
293