Table of Contents
Advertisement
Changing the battery
Fig. 66
Vehicle key: open the battery
compartment cover.
Fig. 67
Vehicle key: removing the battery.
CUPRA recommends you ask a specialised
workshop to replace the battery.
The battery is located to the rear of the vehicle
key, under a cover.
Opening and closing
Set of vehicle keys
Changing the battery
●
Remove the key blade from the vehicle key
›››
page 87.
●
Insert the key blade into the slot
press it in the direction of arrow
the cover by levering it
.
2
●
Remove the battery from the compartment
›››
with a suitable fine object
Fig. 67.
●
Insert the new battery and press it into the
›››
battery compartment
.
●
Place the cover and press it into the vehicle
key housing until it clicks into place.
WARNING
Swallowing a battery with a 20 mm diameter
or any other button battery can cause seri-
ous and even fatal injuries within a very short
time.
●
Keep the vehicle key and key fobs with bat-
teries out of reach of children.
●
If you suspect that someone may have
swallowed a battery, seek immediate medical
attention.
NOTICE
●
If the battery is not changed correctly, the
vehicle key may be damaged.
›››
●
Fig. 66,
Use of unsuitable batteries may damage
the vehicle key. For this reason, always re-
and detach
1
place the dead battery with another of the
same voltage, size and specifications.
●
When fitting the battery, check that the
polarity is correct.
For the sake of the environment
Please dispose of your used batteries cor-
rectly and with respect for the environment.
Synchronize the vehicle key
If the
button is pressed frequently outside of
the vehicle range, it is possible that the vehicle
can no longer be locked or unlocked using the
key. In this case, the key must be resynchron-
ised as described below:
●
Stand next to the vehicle.
●
Briefly press the
twice.
OR:
●
Remove the emergency key
●
Press the
●
Unlock the vehicle with the emergency key.
button on the vehicle key
›››
page 85.
button on the key.
87
Advertisement
Table of Contents
