Table of Contents
Advertisement
and
Fire risk!
The warning lamp
lights up red and is dis-
played along with with a text message on the
instrument cluster accompanied by a continu-
ous audible warning.
●
Stop driving! Get out of the vehicle and
notify the fire department immediately.
●
The high voltage battery temperature is too
high
.
●
If the message is hidden, the warning lamp
remains visible
.
The audible warning can only be turned off
by a qualified workshop. CUPRA recommends
that you visit an official dealer.
WARNING
If there is a risk of fire in the high-voltage
battery, toxic gases may escape or compo-
nents may be released from the high voltage
battery. There is a risk of serious injury, burns
or lethal electric shocks.
●
Park the vehicle safely as soon as possible
›››
page 68, Behaviour in the event of an
accident or fire
.
●
Get out of the vehicle and keep a safe dis-
tance away from it.
●
Call the fire department immediately.
78
High-voltage battery
The charging process is not possible or has
been paused
The charging process indicator located next to
the charging socket lights up red.
Before visiting a specialist workshop, you can
try the following solutions:
●
Plug the charging cable back in.
●
Check that the charging settings are as de-
sired: "immediate" or "programmed".
●
Check that the charging connector is plug-
ged in correctly.
●
Check if a fault is displayed on the charging
station or, depending on the equipment, on
the charging cable protection device.
If the fault cannot be rectified, contact a spe-
cialist workshop immediately.
WARNING
High-voltage components, including the bat-
tery and high-voltage cables, may be live and
damaged. The high voltage system voltage is
dangerous and can cause burns, other inju-
ries and fatal electric shocks.
●
Do not touch the high voltage compo-
nents!
Emergency release of the charging
connector
Valid for: hybrid vehicles
Fig. 59
Between the left wing panel
and the engine bonnet hinge: Charging
connector manual release mechanism
puller.
Unlocking the charging connector
Prerequisites:
●
The charging connector is plugged in cor-
›››
rectly
page 75.
●
The vehicle is unlocked.
●
The charging process has ended or has
›››
paused
page 74.
The manual release mechanism must be used
if these prerequisites are met and it is still
impossible to unplug the charging connector
›››
Advertisement
Table of Contents
