Table of Contents
Advertisement
For safety reasons, it is recommended that
you pair the system and the mobile using Blue-
tooth® and place it on the Connectivity Box
pad, for the best reception without having to
handle the mobile phone.
To establish a connection with the vehicle's ex-
ternal aerial:
●
Place your mobile device in the middle of
the pad with the screen facing up
›››
.
Make sure there are no objects between the
pad and the mobile phone.
Your mobile phone will automatically be ready
to make use of the external aerial.
WARNING
Notifications on the screen of the mobile de-
vice can distract the driver's attention and
increase the risk of a serious accident.
●
Only place one suitable mobile device,
with Qi compatibility if applicable. To ensure
that it operates properly, place it without the
protective case and ensure that it has max-
imum dimensions (width x length) of 80 x
140 mm (3.15 x 5.512 inches) on the base of
the Connectivity Box as indicated.
●
If the mobile device is not placed on the
base of the Connectivity Box, in the correct
position, or if its dimensions exceed those
specified, it may not be recognised or may
not charge correctly. Under certain circum-
stances, the infotainment system indicates
Infotainment system
Telephone interface
that there is a foreign object in the storage
compartment. Using a suitable mobile phone
device and correcting its position can elimi-
nate the fault.
●
If necessary, remove any objects that may
obstruct the cover's closing function.
WARNING
›››
Fig. 170
,
●
The mobile phone may heat up due to the
wireless charging. Think about this before
you pick it up, and take care when removing
it.
●
There must be no metallic or other objects
between the mobile phone and the housing,
to prevent the functionality of the Connec-
tivity Box from being affected.
NOTICE
The base of the Connectivity Box is not re-
movable.
Note
● Your mobile device must support the Qi
inductive charging interface standard for
proper operation.
● The charging time and the temperature
vary in accordance with the device used.
● The maximum charging capacity is 5 W.
● Qi technology does not allow you to charge
more than one mobile device simultane-
ously.
● No improvement in reception can be guar-
anteed if there is more than one mobile
phone on the pad.
● You are advised to keep the engine running
to guarantee proper wireless charging.
● When a telephone with Qi technology is
connected by USB, it will be charged by the
means specified by the manufacturer.
273
Advertisement
Table of Contents
