Table of Contents
Advertisement
PRA and Apple CarPlay ™ websites, at spe-
cialised CUPRA dealerships or at any SEAT
dealership.
Android Auto™
Requirements for Android Auto™
In order to use Android Auto™, the following
requirements must be met:
●
The mobile phone device, called smart-
phone from here on, must be compatible with
Android Auto™.
●
The smartphone must have an Android
Auto™ application installed.
●
If this is not possible via Android Auto Wire-
less, the smartphone must be connected via
the USB connection with data transmission to
the infotainment system.
●
The USB cable used must be an original ca-
ble provided by the smartphone manufacturer.
Android Auto Wireless: Bluetooth® and WLAN
(Wi-Fi) also have to be active on the smart-
phone.
Establish connection
When you first connect a smartphone, follow
the instructions on the infotainment system
screen and on the smartphone.
The requirements must be met to use Android
Auto™.
Launch Android Auto™:
240
Data transmissions
●
Press HOME > Full Link to access the Full
Link main menu.
●
Press Android Auto™ to establish a connec-
tion with the smartphone.
Disconnecting
●
In Android Auto™ mode, press the
icon to access the Full Link main menu.
●
Press
to interrupt the active connection.
Special characteristics
During an active Android Auto™ connection,
the following characteristics are applicable:
●
An active Android Auto™ device can be con-
nected at the same time via Bluetooth® (HFP
profile) with the infotainment system.
●
It is possible to use the phone's functions
through Android Auto™. If the Android Auto™
device is connected at the same time via Blue-
tooth® with the infotainment system, the tele-
phone function of the infotainment can also
be used.
●
An active Android Auto™ device cannot be
used as a media device in the Media main
menu.
●
It is not possible to use the built-in navigation
system and the Android Auto™ navigation sys-
tem at the same time. The last route started
interrupts the one that was previously active.
●
Telephone and Media data can be displayed
on the instrument cluster screen.
●
With the multifunction steering wheel you
can accept or reject incoming calls, as well as
end an ongoing telephone conversation.
Voice control
●
Press
briefly to start voice control using
the infotainment system.
/Exit
●
Press and hold this button to start voice
control (Google Assistant) on the connected
smartphone.
Note
● The availability of technologies depends on
the country and may vary.
● You will find information about technical
requirements, compatible mobile phone de-
vices, certified applications and their availa-
bility on the CUPRA and Android Auto™ web-
sites, at specialised CUPRA dealerships or at
any SEAT dealership.
MirrorLink®
Requirements for MirrorLink®
In order to use MirrorLink®, the following re-
quirements must be met:
●
The mobile device must be compatible with
MirrorLink®.
●
The mobile phone device must be connec-
ted to the infotainment system via a USB con-
nection that is suitable for data transmission.
Advertisement
Table of Contents
