Table of Contents
Advertisement
Note
● Noises will be heard while the stationary air
conditioning is running, caused by its opera-
tion.
● When the outside humidity is high and the
inside temperature low, condensation from
the air conditioning system may evaporate
when the stationary air conditioning is run-
ning. In this case, steam may be released
from underneath the vehicle. This does not
mean that there is a vehicle malfunction.
Programming the stationary air
conditioning
✓ Valid for: hybrid vehicles.
The stationary air conditioning can be pro-
grammed in the Infotainment system for a
scheduled departure time. You can set the de-
sired temperature of the vehicle interior for the
vehicle's planned departure time.
Based on the desired temperature, the vehicle
calculates the time that the stationary air con-
ditioning needs to be switched on to reach this
temperature by the departure time.
Air conditioning the vehicle for departure
●
Open the Battery Manager menu.
●
Set the scheduled departure time.
●
Turn on the air conditioning and charging
functions as needed.
142
Air conditioning
If the two air conditioning and charging func-
tions are on at the same time, the high-voltage
battery is charged first and then the vehicle is
air conditioned. The departure time can only
be enabled when one of the two functions has
been enabled.
If the charging connector is plugged in, the
vehicle starts cooling down around 30 minutes
before the scheduled departure time. If the
vehicle is not ready to drive at the scheduled
departure time, it will be cooled for a further 15
minutes.
If the charging connector is not plugged in, the
air conditioning operating time is reduced to
10 minutes. The operating time is extended by
5 minutes if the vehicle is not ready to drive.
The stationary air conditioning switches off au-
tomatically.
Extended stationary air conditioning
In the Battery Manager menu can be found
an option to add extended air conditioning.
This means if the vehicle is air conditioned (ei-
ther by being switched on immediately or due
to departure scheduling), the convenience
consumers, e.g. seat or rear window heating
may switch on automatically if considered nec-
essary by the Climatronic (in cold conditions)
before the departure time.
Comfort consumers depend on features.
●
Open the Battery Manager menu.
●
Tap on the icons of the seats whose conven-
ience consumers should be switched on in ad-
dition to the stationary air conditioning. The
driver's seat icon always stays activated by de-
fault (the driver's seat icon includes the com-
fort consumers of seat heating and steering
wheel heating).
●
To turn on the rear window heating before
the departure time, switch on the Automatic
rear window heating function.
The maximum waiting time for comfort con-
sumers is approximately 10 minutes before the
departure time.
Immediate activation of the rear window
heating
The rear window heating can be switched
on/off using the CUPRA CONNECT mobile
app or the MyCUPRA website, regardless of
whether or not the stationary air conditioning
is switched on.
Air-conditioning the vehicle after unlocking
it
●
Open the infotainment system's Battery
manager menu.
●
Press
Settings.
●
Enable the When unlocking the vehi-
cle function.
Advertisement
Table of Contents
