Luggage Compartment - Seat CUPRA LEON 2022 Owner's Manual

Table of Contents

Advertisement

NOTICE
Electrical wires or, depending on the fea-
tures, the antenna embedded into the rear
windows could be damaged, even irrepara-
bly, if they are in contact with objects.
Note
Straps for securing the load to the fastening
rings are commercially available from acces-
sory shops.

Luggage compartment

Luggage compartment shelf
Valid for: Leon
Fig. 171 
In the boot: removing and
installing the shelf.
Luggage compartment
Storing objects
Fig. 172 
In the boot: removing and
installing the shelf.
Removing
››› 
Detach the cord loops
Fig. 171
their hooks
.
A
Remove the rear shelf from the side supports
››› 
Fig. 172
by pulling it upwards and then take
it out.
If necessary, the rear shelf can be stored un-
der the luggage compartment double floor
››› 
page 275.
Fitting
Insert the cover horizontally so that the
"recess" fits onto the axis of the supports
››› 
Fig. 172
and press down until it engages.
››› 
Attach the securing straps
onto the rear lid.
WARNING
Animals, loose or unsecured or objects car-
ried on the rear shelf can cause serious injury
in case of sudden manoeuvring or braking or
in case of an accident.
Do not leave hard, sharp or heavy objects
or in bags on the rear shelf.
Never transport animals on the rear shelf.
NOTICE
Before closing the rear lid, ensure that the
rear shelf is correctly fitted.
An overloaded luggage compartment
could mean that the rear shelf is not cor-
from
B
rectly seated and it may be bent or damaged.
If the luggage compartment is overloaded,
remove the tray.
Note
Ensure that, when placing items of clothing
on the luggage compartment cover, rear visi-
bility is not reduced.
Store the rear shelf
Valid for: Leon
Fig. 171
B
275

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cupra sportstourer 2022

Table of Contents