Seat CUPRA LEON 2022 Owner's Manual page 160

Table of Contents

Advertisement

The steering wheel is turned slightly.
When the air conditioning is activated.
Additional information related to the auto-
matic gearbox
The engine stops when the selector lever is in
D, N and S, as well as in Tiptronic mode. When
the parking lock button P is activated, the en-
gine will also remain off when you remove your
foot from the brake.
In order to start the engine up again the ac-
celerator must be pressed, or another gear en-
gaged or the brake released.
If the selector lever is placed in R while stop-
ped, the engine will start up again.
Additional information about vehicles with
Adaptive Cruise Control (ACC)
In vehicles with ACC function, the engine will
start up again in certain operating conditions
if the radar sensor detects that the vehicle
ahead drives off again.
158
Driving
WARNING
Never switch the engine off until the vehi-
cle is stationary. The operation of the brake
and steering will not be fully guaranteed.
More force will be needed to turn the steer-
ing wheel or to brake. You could suffer an
accident and even serious injuries.
To avoid injury, make sure that the Start-
Stop system is switched off when working in
››› 
page 158
the engine compartment
NOTICE
The Start-Stop system must always be
switched off when driving through flooded
››› 
page 147
areas
.
Note
● In vehicles with an automatic gearbox,
you can control whether the engine should
switch off or not by reducing or increasing
the brake force applied. While the vehicle re-
mains stopped, the engine will not stop if the
brake pedal is slightly pressed, in traffic jams
with frequent stopping and starting for ex-
ample. As soon as strong pressure is applied
to the brake pedal, the engine will stop.
● When stopped, the brake pedal must be
kept pressed to ensure that the vehicle does
not move.
● If the engine "stalls" with a manual gear-
box, it can be directly started up again by im-
mediately pressing the clutch pedal.
● If the lever is placed in position D, N or S af-
ter engaging reverse gear, 10 km/h (6 mph)
in a forwards direction must be reached for
the system to be in a condition to stop the
engine.
Manually connecting and discon-
necting the Start-Stop system
Not valid for PHEV hybrid vehicles
.
Fig. 113 
On the infotainment system
display: Start-Stop system on.
main menu.
View with the Infotainment
system off.
If you do not wish to use the system, you can
switch it off manually:
In the infotainment system select
sistants > Smart Assistants.
View in the
> As-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cupra sportstourer 2022

Table of Contents