Table of Contents
Advertisement
Variable luggage compartment
floor
Fig. 179
Variable luggage compartment
floor:
raised position;
position.
278
Fig. 180
position.
Variable floor in high position
●
To move from the low position to the
high position, lift the floor using the handle
›››
Fig. 179
of the floor has fully passed the supports
●
Move the floor forward over the supports as
far as the rear seat backrest and then lower the
floor with the handle
Variable floor in low position
lowered
●
To move from the high position to the
low position, lift the floor using the handle
›››
Fig. 179
of the floor has fully passed the supports
●
Now let the front part fall to the floor and
slide the floor forwards as far as the rear seat
backrest; lower the floor at the same time with
the handle
Storing objects
Variable boot floor: tilted
, and pull it back until the front
1
2
.
1
, and pull it back until the front
1
2
.
1
Variable floor in the tilted position
When the variable floor is tilted you can access
the spare wheel or anti-puncture kit area.
●
Lift the variable floor in the high position us-
›››
ing handle
Fig. 179
1
it towards the backrest of the rear seats until it
folds along the hinge line and the movable part
of the floor is resting on itself.
●
Rest the floor on its housings
(arrows).
WARNING
●
Always secure objects, even when the lug-
gage compartment floor is properly lifted.
●
Only objects that do not protrude more
than 2/3 the height of the floor may be car-
ried between the rear seat and the raised
.
luggage compartment floor.
●
Only objects that do not weigh than ap-
proximately 7.5 kg may be carried between
the rear seat and the raised luggage com-
partment floor.
.
, pull it up and push
›››
Fig. 180
Advertisement
Table of Contents
