Table of Contents
Advertisement
Adjusting the height of the head restraints
●
Grab the sides of the head restraints with
both hands and push upwards to the desired
position. To lower it, repeat the same action,
pressing the button on the side
›››
Fig. 92.
●
The headrest must lock correctly in one po-
sition.
Removing and fitting the headrests
Fig. 93
Front head restraint: removal.
114
Seats and head restraints
›››
Fig. 91
,
1
Fig. 94
Rear head restraint: removal.
Removing the front head restraints
●
Lower the head restraint if necessary.
●
To unlock it, look for the rabbet on the bot-
tom of the backrest and press in the direction
›››
of the arrow
●
Remove the head restraint in the direction of
the arrow
.
2
Fitting the front head restraints
●
Place the head restraint in the correct posi-
tion on the guides of the corresponding back-
rest and insert it.
●
Press the head restraint downwards until the
bars lock.
●
Adjust the head restraint according to the in-
structions on the correct position of the seat.
Fig. 93
.
1
Removing the rear head restraints
To remove the head restraint, the correspond-
ing backrest must be partially folded forward.
›››
●
Unlock the backrest
page 111.
●
Move the head restraint upwards until it ar-
rives to the top.
›››
●
Press button
Fig. 94
, while simultane-
1
ously pressing on the safety hole
screwdriver a maximum of 5 mm wide, and re-
move the headrest.
●
Move the backrest until it engages properly
›››
in Folding down and raising the rear
seat backrest on
page 112.
Fitting the rear head restraints
To mount the external head restraints, the cor-
responding backrest must be partially folded
forward.
›››
●
Unlock the backrest
page 111.
●
Insert the head restraint bars into the guides
until they perceptibly engage. It should not be
possible to remove the head restraint from the
backrest.
●
Move the backrest until it engages properly
›››
in Folding down and raising the rear
seat backrest on
page 112.
with a flat
2
Advertisement
Table of Contents
