Seat CUPRA LEON 2022 Owner's Manual page 174

Table of Contents

Advertisement

The TCS function should only be switched off
in situations in which traction is insufficient.
Depending on the finishes and versions, there
is the possibility of disconnecting only the TCS
or activating the ESC in "Sport" mode.
Disconnecting and connecting the ESC in
"Sport" mode
In Sport mode, the ESC can be switched off
and on by briefly pressing the
››› 
centre console
Fig. 118.
OR: in the infotainment system, press the
function button
> Assistants > ESC Menu
››› 
page 36.
When "Sport" mode is connected, the inter-
ventions of the ESC to stabilise the vehicle,
and the traction control (TCS) interventions
are limited. In vehicles with 4-wheel drive, the
TCS is disconnected completely . In addition,
the control lamp
lights up on the instrument
cluster.
Disconnecting and connecting the ESC
The ESC can be switched on and off by
briefly pressing the
button on the centre
››› 
console
Fig. 118.
OR: in the infotainment system, press the
function button
> Assistants > ESC Menu
››› 
page 36.
172
When the ESC is disconnected the control
warning lamp
cluster.
WARNING
The ESC Sport mode should be activated only
when traffic conditions and the ability of the
driver allow it. Danger of skidding!
With ESC in Sport mode, the stabilising
function will be limited or fully deactivated
button on the
(depending on the model version) for sport-
ier driving. The vehicle may skid.
If the ESC is deactivated, the vehicle stabili-
sation function is not available.
Note
If the ESC is disconnected or "Sport" mode
is selected, the cruise control system will be
switched off.
Troubleshooting
The ABS does not work properly or does
not work at all
The control lamp switches on yellow.
Contact a specialised workshop. The vehi-
cle's brakes still work without the ABS.
The ESC or TCS is regulating
The control lamp flashes yellow.
Driving
lights up on the instrument
ESC fault
The control lamp switches on yellow. The ESC
has been switched off.
There is a fault or defect.
Turn off the ignition and turn it on again.
If possible, drive for a short distance at 15-20
km/h (9-12 mph).
If the control lamp
is still on, go to a speci-
alised workshop.
The brake assist systems make noises
When the described brake assist systems inter-
vene, you may hear noises.
WARNING
When the ignition is switched on, the sta-
tus of the brake system and the brake as-
sist functions are automatically checked. The
control lamps on the instrument cluster light
up briefly and then go out. Any indicator
lamp that remains on indicates a fault. Seek
qualified technical assistance immediately.
If the brake system warning light
on together with the
control lamp, the ABS
regulation function may not work and the
rear wheels may lock relatively quickly when
braking. This can lead to loss of control of
the vehicle! If possible, slow down and drive
slowly and carefully to the nearest specialist
workshop to have the brake system inspec-
ted. During this journey, avoid heavy braking
and any sudden manoeuvres.
comes

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cupra sportstourer 2022

Table of Contents