Table of Contents
Advertisement
Pressing this symbol selects a higher the-
oretical charge level. The vehicle tries to
reach that new theoretical high-voltage
battery charge level while driving. The ve-
hicle is powered by the combustion en-
gine. If the combustion engine has "ex-
cess" power, it is used to charge the high-
voltage battery.
This option increases fuel consump-
tion. CUPRA therefore recommends us-
ing the charging socket to charge the
high-voltage battery, whenever possible
›››
page 74.
The high-voltage battery charge level is
=
kept at around the current level while driv-
ing. If you accelerate harder or increase
the vehicle speed, the combustion engine
starts up. When permitted by the driver's
demand for acceleration and the vehicle
speed, the vehicle switches back to elec-
tric mode.
Pressing this symbol selects a lower theo-
retical charge level. The vehicle only uses
the battery's charge when it is above the
selected theoretical charge level. The rest
is kept until the end of the journey.
The Intelligent Hybrid App allows the user
to save electrical energy until reaching home
(charging point) with just "one click". If this
option is not selected, the maximum amount
of electrical energy will be consumed until the
1)
Valid for versions with the start button on the centre console.
156
Driving
selected destination is reached. If the user has
no active route, the function will offer the ac-
tivation of a predictive route and BMA mode
from the widget itself with just one click.
Show the active operating mode
The operating mode active at any given time
is displayed on the instrument cluster display,
e.g.
.
WARNING
Switching to a different operating mode
while driving can distract you from traffic
conditions and cause accidents.
Note
Information about the operating mode that
is currently active is displayed on the instru-
ment cluster display, along with the charge
level of the high-voltage battery.
Troubleshooting
✓ Valid for: hybrid vehicles
E-MODE operating mode is not availa-
ble
The indicator lamp lights up in white.
The E-MODE operating mode
electric mode) cannot be used temporarily be-
cause one or more conditions are not met.
●
The conditions must be met to use the E-
MODE operating mode.
Start-Stop system
Description and operation
Not valid for PHEV hybrid vehicles
The Start-Stop system helps you to save fuel
and reduce CO
In Start-Stop mode, the engine will automati-
cally switch off when the vehicle stops or is
stopping. The ignition remains switched on.
The engine automatically switches back on
when required.
In this scenario, the light of the
button remains lit.
When the ignition is switched on, the Start-
Stop function is automatically activated.
Control lamps
The Start-Stop system is available, the
automatic engine shutdown is active.
The Start-Stop system is not available or
has been disconnected.
(driving in
emissions.
2
1)
Advertisement
Table of Contents
