Table of Contents
Advertisement
●
Press Home > Full Link
Configure Wireless Full Link
In order to use Wireless Full Link, you must first
pair the mobile phone device with the infotain-
ment system. To do this, proceed as follows:
Connect a mobile phone device for the first
time.
●
Unlock the mobile phone device.
●
Enable Wi-Fi reception and Bluetooth® on
the mobile phone device.
●
Connect the mobile phone device to the in-
fotainment system using a USB cable or via
Bluetooth®.
●
Access the Full Link main menu, if it is not
displayed automatically.
●
Select the mobile phone device and the
technology you want.
●
Confirm authorisation inquiries on the mo-
bile phone device to grant the necessary au-
thorisations to the infotainment system.
●
Disconnect the USB connection and con-
nect with the infotainment system again via
Wi-Fi or Bluetooth®. Wireless Full Link is now
configured.
The pairing has concluded. The connected
mobile phone device can also use Wireless Full
Link from now on without the USB connection.
If pop-up menus are rejected during the con-
nection process, Wireless Full Link will not be
available. In this case, CUPRA recommends re-
238
Data transmissions
moving the devices in both the telephone set-
tings and the infotainment system, and restart-
ing the connection process.
WARNING
The use of applications while driving can dis-
tract your attention from the traffic. Any dis-
traction affecting the driver in any way can
lead to an accident and cause injuries.
●
Always drive as carefully and responsibly as
possible.
WARNING
Any applications that are not suitable or ex-
ecute incorrectly may cause damage to the
vehicle, accidents and serious injuries.
●
Protect the mobile phone device and its
applications from inappropriate use.
●
Never carry out modifications to the appli-
cations.
●
Follow instructions in the instruction man-
ual for the mobile phone device.
NOTICE
CUPRA cannot be held liable for any damage
caused to the vehicle as a result of the use
of applications that are of poor quality or
are defective, the inadequate programming
of the applications, the insufficient coverage
of the network, the loss of data during trans-
mission or the improper use of mobile phone
devices.
Note
● Wireless Full Link may not be compatible
with all technologies.
● When crossing the border into countries
with permitted radio frequencies different
to those in your own country, running the
Full Link Wireless function may be restricted
or even unavailable due to legal regulations.
This can also be indicated by a message in
the infotainment system. Running Full Link
via cable is not affected by this restriction
and can continue to be used.
Applications (apps)
With Full Link, the display of the contents of
CUPRA applications and other providers instal-
led on mobile phone devices can be transfer-
red to the infotainment screen.
In the case of third-party applications, there
may be compatibility problems.
Applications, their use and the necessary mo-
bile phone connection may be pay per use.
The offer of applications can be varied and de-
signed for a vehicle or a specific country. The
content and volume of applications, as well
as the companies that offer them, may vary.
Some applications also depend on the availa-
bility of third-party services.
It cannot be guaranteed that all the applica-
tions offered will work on all mobile phone de-
vices or with all their operating systems.
Advertisement
Table of Contents
