Tf Position Detection Sensor Check - Epson SC-F2000 Service Manual

SC-F2000

4.13.5 TF Position Detection Sensor Check

EXECUTION MODE
Normal Mode
PROCEDURE
1. Turn the printer ON.
2. Start the Service Program and select
3. Click [RUN] to move the Table Assy.
Figure 4-63. [TF position detection sensor Check] Screen
4. The following screen is displayed when the Rear TF Sensor detects the Table Assy
correctly.
ADJUSTMENT
[Blue]: Button or menu name on the program screen / [Black]: Button or menu name on the operation panel of the printer
[TF position detection sensor Check].
5. Press [OK] to move the TABLE ASSY to the front of the printer again.
6. The following screen is displayed when the Front TF Sensor detects the Table
Assy correctly.
7. Click [OK] to finish the adjustment.
TF Adjustments
Figure 4-64. Result (Rear TF Sensor)
Figure 4-65. Result (Rear TF Sensor)
Revision C
261
Confidential