Epson SC-F2000 Service Manual page 142

SC-F2000
3.4.5.10 OIL PAD HOLDER
C H E C K The procedure below is for disassembling the OIL PAD HOLDER
P O I N T
at the right. Use the same procedure for disassembling the left one.
1. Unlock the CR UNIT. (p69)
2. Disengage the two hooks, and remove the OIL PAD HOLDER.
Figure 3-109. Removing the OIL PAD HOLDER
When replaced with a new part, make sure to lubricate the new one
Lubrication Lubrication
referring to "5.6 Lubrication"
DISASSEMBLY & ASSEMBLY
OIL PAD HOLDER
Hooks
(p293).
Disassembly and Assembly Procedure
Revision C
142
Confidential