SC-F2000
3.4.5.9 CR UNIT
A D J U S T M E N T
When replacing/removing this part, refer to
R E Q U I R E D
Items and the Order by Repaired Part" (p194)
perform the specified operations including required adjustment.
1.
Perform the Ink eject.
2.
Remove the PRINTER COVER.
3.
Remove the RIGHT HOUSING PLATE.
4.
Remove the RIGHT COVER ASSY.
5.
Remove the LEFT HOUSING PLATE.
6.
Remove the LEFT COVER ASSY.
7.
Unlock the CR UNIT.
(p69)
8.
Remove the CR SCALE.
(p123)
9.
Remove the CR MOTOR ASSY.
10. Remove the CR COVER.
(p103)
11. Remove the DAMPER KIT.
(p104)
12. Remove the PRINT HEAD.
(p109)
13. Remove the three screws, and remove the APG Frame.
A) Silver M3x6 S-tite screw: 3 pcs
Pay attention to the positioning points (See
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
(p72)
(p74)
(p88)
(p73)
(p86)
(p125)
Figure
3-104).
Disassembly and Assembly Procedure
A
Positioning point
A
Positioning point
A
Figure 3-104. Removing the APG Frame
Revision C
APG Frame
138
Confidential