Epson SC-F2000 Service Manual page 108

SC-F2000

Installing the DAMPER KIT, attach the sponges, film (1) and
film (2) of the INK MIST COVER ASSY.

Make sure to tighten the screw that secures the TUBE ASSY
using a torque driver with the following torque.
0.39 ± 0.05 N/m

Before installing the joint, make sure the Joint Rubbers are
attached to it.

Before attaching the Joint Rubber, let it get wet with cleaning
liquid.

Always use new Joint Rubbers.

Insert only Joint Rubber per line between upper Joint and
lower Joint.

Confirm there are no foreign objects attached on the Joint
Rubbers.
DISASSEMBLY & ASSEMBLY
(p114)
Joint Rubber
Disassembly and Assembly Procedure
Revision C
108
Confidential