Epson SC-F2000 Service Manual page 247

SC-F2000
PROCEDURE
(P. 103)
1. Remove the CR Cover.
2. Loosen the screws that secure the PG adjustment levers on both sides.
3. Adjust the PG by moving the PG adjustment levers up or down.
C H E C K Move the levers on both sides by the same amount when adjusting
P O I N T
the PG.
4. After the adjustment is completed, try the PG check again. Repeat the check and
adjustment until the PG falls within the standard values.
Move the lever up: CR comes up.
Move the lever down: CR comes down.
Figure 4-48. PG Adjustment Levers
ADJUSTMENT
[Blue]: Button or menu name on the program screen / [Black]: Button or menu name on the operation panel of the printer
PG adjustment levers
Fixing screws
Head Related Checks and Adjustments
Revision C
247
Confidential