SC-F2000
3.4.5.3 PRINT HEAD
A D J U S T M E N T
When replacing/removing this part, refer to
R E Q U I R E D
Items and the Order by Repaired Part" (p194)
perform the specified operations including required adjustment.
Be careful not to touch the nozzle surface of the PRINT HEAD.
C A U T I O N
The PRINT HEAD can be replaced without "Tube inner
pressure reduction". (thanks to the DAMPER KIT's self
sealing valve, no need to do Tube inner pressure reduction".)
C H E C K
Remove films and/or sponges of the INK MISTCAOVER ASSY if
P O I N T
attached.
(p114)
1.
Unlock the CR UNIT.
(p69)
2.
Remove the CR COVER.
(p103)
3.
Disengage the hook, and remove the Tube Guide Holder.
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
x
Disassembly and Assembly Procedure
Insert the protrusion of the Tube Guide Holder in the hole on the
CR UNIT.
Tube Guide Holder
Revision C
CR UNIT
Protrusion
109
Confidential