Epson SC-F2000 Service Manual page 179

SC-F2000
3.4.6.8 MEDIA SENSOR FRAME ASSY
A D J U S T M E N T When replacing/removing this part, refer to
R E Q U I R E D
Items and the Order by Repaired Part" (p194)
perform the specified operations including required adjustment.
1. Remove the PRINTER COVER.
2. Remove the RIGHT HOUSING PLATE.
3. Remove the RIGHT COVER ASSY.
4. Remove the LEFT HOUSING PLATE.
5. Remove the LEFT COVER ASSY.
6. Remove the REAR COVER SUB ASSY.
7. Remove the REAR COVER. (p79)
8. Release the cable from the two clamps.
9. Disconnect the cable from the relay connector (No.5).
10. Remove the four screws that secure the MEDIA SENSOR FRAME ASSY.
A) Silver M3x6 S-tite screw with built-in spring washer: 4 pcs
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
(p72)
(p74)
(p88)
(p73)
(p86)
(p77)
Disassembly and Assembly Procedure
Positioning
point
A
A
Clamp
Clamp
Figure 3-144. Removing the MEDIA SENSOR FRAME ASSY (1)
Revision C
MEDIA SENSOR FRAME ASSY
Positioning
point
A
A
Relay connector
(No.5)
179
Confidential