Epson SC-F2000 Service Manual page 161

SC-F2000
3.4.5.17 RIGHT INK HOLDER ASSY
A D J U S T M E N T When replacing this part, refer to
R E Q U I R E D
the Order by Repaired Part" (p194)
specified operations including required adjustment.
1. Perform the Ink eject.
2. Remove the PRINTER COVER.
3. Remove the RIGHT HOUSING PLATE.
4. Remove the RIGHT COVER ASSY.
5. Remove the LEFT HOUSING PLATE.
6. Remove the LEFT COVER ASSY.
7. Remove the REAR COVER SUB ASSY.
8. Remove the REAR COVER. (p79)
9. Remove the RIGHT IC COVER SENSOR.
10. Remove the RIGHT IH COVER.
11. Remove the Maintenance Cover.
12. Disconnect the cables from the relay connectors (No.4, No.6, No.8).
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment Items and
and make sure to perform the
(p72)
(p74)
(p88)
(p73)
(p86)
(p77)
(p91)
(p85)
(p143)
Disassembly and Assembly Procedure

C H E C K
Leave the relay connectors at the main body side to reuse them.
P O I N T

Confirm the relay connectors to disconnect the cables.
13. Remove the FFC from the back side of the RIGHT INK HOLDER ASSY.
Revision C
Relay connectors
Relay connector
Confidential
161