Epson SC-F2000 Service Manual page 98

SC-F2000
3.4.4.3 SUB-B BOARD
1. Remove the PRINTER COVER.
2. Remove the RIGHT HOUSING PLATE.
3. Remove the RIGHT COVER ASSY.
4. Remove the LEFT HOUSING PLATE.
5. Remove the LEFT COVER ASSY.
6. Remove the REAR COVER SUB ASSY.
7. Remove the REAR COVER. (p79)
8. Disconnect all cables and FFCs from the SUB-B BOARD.
9. Remove the four screws, and remove the SUB-B BOARD.
A) Silver M3x8 Bind machine screw: 4 pcs
DISASSEMBLY & ASSEMBLY
(p72)
(p74)
(p88)
(p73)
(p86)
(p77)
Disassembly and Assembly Procedure
SUB-B BOARD
A
A
A
Figure 3-44. Removing the SUB-B BOARD
Revision C
A
98
Confidential