Epson SC-F2000 Service Manual page 151

SC-F2000
3.4.5.14 BUFFR ASSY
1. Perform the Ink eject.
2. Remove the PRINTER COVER.
3. Remove the RIGHT HOUSING PLATE.
4. Remove the RIGHT COVER ASSY.
5. Remove the LEFT HOUSING PLATE.
6. Remove the LEFT COVER ASSY.
7. Remove the REAR COVER SUB ASSY.
8. Remove the REAR COVER. (p79)

When the tubes is removed at the following step, ink may drip
C A U T I O N
off from the tubes. Prepare a waste cloth in advance and be
careful not to contaminate the surroundings.

When replacing the BUFFER ASSY, keep the joints of tubes
up. Otherwise ink may leak.
9. Remove the two screws, and remove the TUBE ASSY.
A) Silver M2.5x16 Bind machine screw (Bit No.1): 2 pcs
10. Remove the two screws, and remove the tube of the RIGHT INK HOLDER
ASSY.
B) Silver M3x10 Bind machine screw: 2 pcs
11. Peel off the FFC from the BUFFR ASSY.
Attach the FFC aligning the holes of the frame with double-sided
tape. (See Figure 3-120)
12. Remove the three screws, and remove the BUFFR ASSY.
C) Silver M3x6 Cup S-tite screw: 3 pcs
DISASSEMBLY & ASSEMBLY
(p72)
(p74)
(p88)
(p73)
(p86)
(p77)
Disassembly and Assembly Procedure
TUBE ASSY
Tube (RIGHT INK
HOLDER ASSY)
C
FFC
Hole
Figure 3-120. Removing the BUFFR ASSY
Revision C
A
A
BUFFR ASSY
B
B
Rear side
C
C
151
Confidential