Epson SC-F2000 Service Manual page 127

SC-F2000
3.4.5.7 HEAD FFC
1. Remove the PRINTER COVER.
2. Remove the RIGHT HOUSING PLATE.
3. Remove the RIGHT COVER ASSY.
4. Remove the LEFT HOUSING PLATE.
5. Remove the LEFT COVER ASSY.
6. Remove the REAR COVER SUB ASSY.
7. Remove the REAR COVER. (p79)
8. Remove the RIGHT IC COVER SENSOR.
9. Remove the RIGHT IH COVER.
10. Remove the LEFT IC COVER SENSOR.
11. Remove the LEFT IH COVER. (p84)
12. Remove the PANEL ASSY. (p75)
13. Unlock the CR UNIT. (p69)
14. Remove the CR COVER. (p103)
15. Remove the PRINT HEAD. (p109)
16. Remove the five screws that secure the Front Cover Assy.
A) Silver M3x6 S-tite screw: 3 pcs
B) Silver M3x8 Cup S-tite screw: 2 pcs
17. Release the USB cable from the three clamps.
DISASSEMBLY & ASSEMBLY
(p72)
(p74)
(p88)
(p73)
(p86)
(p77)
(p91)
(p85)
(p90)
Disassembly and Assembly Procedure
Clamp
USB cable Clamps
Front Cover Assy
A
A A
B A
Figure 3-91. Removing the Front Cover Assy (1)
Revision C
B
127
Confidential