Setting For Media Position Detection - Epson TM-C3400BK Technical Reference Manual

2. Setting for media position detection

This procedure is not required when media position detection is not changed.
 When paper remains in the printer, media position detection cannot be set.
Be sure to remove the paper before turning on the printer.
 The changed setting of the media position detection is saved in the NV memory of the
printer when the printer is turned off. Be sure to turn off the printer to enable the setting.
1
Turn the power on.
2
Remove the paper in the printer.
3
Display the printer driver window. (See
153 for how to display the driver window.)
4
Change [Media Position Detection] on [Maintenance And Utilities] tab of
the printer driver depending on the paper to use.
Paper type to use
Black Mark Die-cut Label
Black Mark Receipt
Black Mark Receipt
Die-cut Label/Black Mark Die-cut Label
/Transparent Die-cut Label
5
Turn the power off.
How to Use the Printer Driver on page
Media position detection setting
Detects black marks of die-cut label
Detects black marks of receipt
Detects black marks of receipt
Detects the gap between labels
Chapter 2 Setup
2
89