Epson SC-F2000 Service Manual page 245

SC-F2000
PROCEDURE
1. Press the F11 key on the keyboard to release the CR lock.
2. Move the CR Unit to the full side.
(P. 103)
3. Remove the CR Cover.
4. Adjust the head slant by rotating the adjustment lever. See
details of the rotational direction.
Do not apply extra force to the adjustment lever because it is
C A U T I O N
fragile.
Increment
Figure 4-45. Head Slant Adjustment
5. Print the adjustment pattern and check the result. Repeat the adjustment and check
of the result until the adjustment is completed.
ADJUSTMENT
[Blue]: Button or menu name on the program screen / [Black]: Button or menu name on the operation panel of the printer
Figure 4-45 for the
Adjustment lever
Decrement
Head Related Checks and Adjustments
6. Attach the CR Cover after the adjustment is completed.
Rear Front
Head slant condition
Paper feed direction
Specific pattern
Adjustment lever
Print Head
Figure 4-46. Adjustment
Revision C
Rear Front
Print Head
245
Confidential