Epson SC-F2000 Service Manual page 184

SC-F2000
3. Remove the screw, and remove the TF ENCODER BOARD ASSY.
B) Silver M3x6 Cup S-tite screw: 1 pcs
After assembling the TF ENCODER BOARD ASSY, confirm that
the TF SCALE does not contact with the TF ENCODER BOARD.
TF ENCODER BOARD
4. Remove the FFC from the connector of the TF ENCODER BOARD.
B
Connector
FFC
Figure 3-149. Removing the TF ENCODER BOARD ASSY
DISASSEMBLY & ASSEMBLY
5.
TF SCALE
TF ENCODER BOARD ASSY
Disassembly and Assembly Procedure
Remove the screw, and remove the TF ENCODER BOARD.
C) Silver M2.6x5 Bind S-tite screw: 1 pcs
Attach the two tabs of the TF ENCODER BOARD to the
positioning hole and groove of the Sensor frame.
TF ENCODER BOARD
TF ENCODER BOARD
Figure 3-150. Removing the TF ENCODER BOARD
Revision C
Tab and groove
Sensor frame
Tab and positioning hole
C
184
Confidential