Epson SC-F2000 Service Manual page 296

SC-F2000
[Lubrication 5]
Part Name Sub Shaft Guide Plate
Lubricants (Part Code) G-84 (1516265)
φ 2mm × 4 mm × 6 points
Amount
φ 2 mm injector
Lubrication Tool
Lubricate inside of the Sub Shaft Guide Plate, then spread the lubricant
Lubrication Manner
entirely with a waste cloth.
Note Be careful not to apply the lubricant beyond the specified point.
Sub Shaft Guide Plate
Lubrication Points
MAINTENANCE
[Lubrication 6]
Part Name
Lubricants (Part Code) G-71 (1480655)
Amount
Lubrication Tool
Lubrication Manner
Note
Sub Shaft Guide Plate
Side
view
Lubrication
Driven Pulley
φ 2 mm × 3 mm
φ 2 mm injector
Apply G-71, then insert the Driven Pulley Shaft.
Be careful not to apply the lubricant beyond the specified point.
Driven Pulley
Lubrication Point
Revision C
296
Confidential