Epson SC-F2000 Service Manual page 90

SC-F2000
3.4.3.16 LEFT IC COVER SENSOR
A D J U S T M E N T When replacing/removing this part, refer to
R E Q U I R E D
Items and the Order by Repaired Part" (p194)
perform the specified operations including required adjustment.
1. Open the LEFT IC COVER.
2. Disengage the two hooks using flat-blade screwdriver or a similar tool, and
remove the LEFT SENSOR COVER.
Figure 3-33. Removing the LEFT SENSOR COVER
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
Hooks
LEFT SENSOR COVER
Disassembly and Assembly Procedure
3. Disengage the two hooks, and remove the LEFT IC COVER SENSOR in the
direction of the arrow.
4. Disconnect the cable from the connector of the sensor.
LEFT IC COVER SENSOR
Cable
Connector
Hooks
Figure 3-34. Removing the LEFT IC COVER SENSOR
Engage the lower hook first when attaching the LEFT IC COVER
SENSOR (See Figure
Revision C
Side view
LEFT IC COVER SENSOR
Hook (lower)
3-34).
Confidential
90