Epson SC-F2000 Service Manual page 183

SC-F2000
3.4.6.11 TF ENCODER BOARD ASSY
A D J U S T M E N T When replacing/removing this part, refer to
R E Q U I R E D
Items and the Order by Repaired Part" (p194)
perform the specified operations including required adjustment.
1. Remove the REAR COVER SUB ASSY.
Be sure to remove the REAR COVER SUB ASSY while supporting
C A U T I O N
it with your hand because the REAR COVER ASSY will drop if the
screws are removed.
2. Remove the six screws, and remove the Rear Bottom Sub Frame.
A) Silver M3x6 Cup S-tite screw: 6 pcs
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
(p77)
Disassembly and Assembly Procedure
Upper
A
A
Rear Bottom Sub Frame
Figure 3-148. Removing the Rear Bottom Sub Frame
Revision C
A
A
A
A
183
Confidential