Epson SC-F2000 Service Manual page 185

SC-F2000
3.4.6.12 TF MOTOR ASSY
A D J U S T M E N T When replacing this part, refer to
R E Q U I R E D
the Order by Repaired Part" (p194)
specified operations including required adjustment.
1. Remove the REAR COVER SUB ASSY.
2. Remove the Rear Bottom Sub Frame.
3. Loosen the two screws, and loosen the tension of the TF TIMING BELT.
4. Remove the two screws, and remove the TF MOTOR ASSY.
A) Silver M3x5 machine screw: 2 pcs
5. Release the cable from the clamp.
6. Disconnect the cable from the relay connector.
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment Items and
and make sure to perform the
(p77)
(p183)
Disassembly and Assembly Procedure
Relay connector
Clamp
Cable
TF MOTOR ASSY TF MOTOR ASSY
Figure 3-151. Removing the TF MOTOR ASSY
Revision C
TF TIMING BELT
Screw
A
A
Screw
185
Confidential