Epson SC-F2000 Service Manual page 92

SC-F2000
3.4.3.18 PRINTER COVER OPEN SENSOR
A D J U S T M E N T When replacing/removing this part, refer to
R E Q U I R E D
Items and the Order by Repaired Part" (p194)
perform the specified operations including required adjustment.
1. Open the PRINTER COVER.
2. Disengage the two hooks using flat-blade screwdriver or a similar tool, and
remove the SENSOR COVER.
Hooks
Figure 3-37. Removing the SENSOR COVER
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
SENSOR COVER
Disassembly and Assembly Procedure
3. Disengage the two hooks, and remove the PRINTER COVER OPEN SENSOR in
the direction of the arrow.
4. Disconnect the cable from the connector of the sensor.
Connector
PRINTER COVER
OPEN SENSOR
Hooks
Figure 3-38. Removing the PRINTER COVER OPEN SENSOR

Be sure to attach the sensor so that the connector comes inside
of the printer (See

Engage the rear hook first when attaching the PRINTER
COVER OPEN SENSOR (See
Revision C
Cable
Side view
PRINTER COVER OPEN SENSOR
Hook (rear)
Figure 3-38).
Figure 3-38).
Confidential
92